HaloIR™ Halotherapy & Infrared Sauna Installation
Installation
Choosing a location
Installation requirements for your sauna are as follows:
- Your Halotherapy Cabin is a self-contained and freestanding unit. It should not be built into any structure without prior consultation.
- Leave 2 feet of extra space on the left side for Halogenerator.
- Maintain a minimum of 4-inch clearance on all sides of the unit to allow air to circulate while giving
access for the power cord. - Your Halotherapy Cabin should be placed on a level and dry area.
Assembly
These halotherapy and infrared sauna cabins are easy to assemble due to their modular constructions.
Detailed step-by-step written and visual instructions are provided.
Exterior and interior measurements
HaloIR™ 1-Person
HaloIR™ 2-Person
HaloIR™ 3-Person
HaloIR™ 4-Person ADA
Electrical specifications
All units are Single Phase
HaloIR™ 1-Person
- 120 volts
- 1,600 watts
- <15 amps
Requires a 120v 15 amp outlet.
Electrical plug:
NEMA 5-15p
With add-ons (red light, etc):
NEMA 5-20 Plug and Outlet
HaloIR™ 2-Person
- 120 volts
- 1,780 watts
- <20 amps
Requires a 120v 20 amp outlet.
Electrical plug:
NEMA 5-20p
With add-ons (red light, etc):
NEMA 5-20 Plug and Outlet
HaloIR™ 3-Person
- 120 volts
- 2,320 watts
- <20 amps
Requires a 120v 20 amp outlet.
Electrical plug:
NEMA 5-20p
With add-ons (red light, etc):
NEMA 5-30 Plug and Outlet
HaloIR™ 4-Person ADA
- 240 volts
- 2,610 watts
- <20 amps
Requires a 240v 20 amp outlet.
Electrical plug:
NEMA 6-15p (no change)
240V units require a 2-Pole breaker
These numbers will be different for any other voltage standard (110V, 208V, etc).
Warranty
Lifetime Warranty
Halogenerator
5-year Warranty
Cabinetry & Glass
Electrical
Heaters
Controls
Get Pricing and Your Questions Answered Today!
Please fill out the short form below, you will receive a response within 2 minutes
Schedule a phone call
• In the U.S.
Which best describes you?
Or send us an email message: info@halotherapysolutions.com
Products